מוצעות מכונות לבדיקת התעייפות חומרים בתהליכי מתיחה/לחיצה, פיתול, כפיפה, למגוון יישומים בתחומי הרפואה, מתכת, פלסטיקה...., בתדירויות נמוכות, 0.01-100 הרץ, בעומסים 50-1000 KN.
Specifications
Load Static KN ±50 ±100 ±200 ±500 ±750 ±1000
Capacity KN 50, 100, 200, 500, 750, 1000
Load ±1.0% of reading
Displacement ±1.0%FS of each file
Measuremnt accuracy Deformation ±1.0% of reading
Range of frequency 0.01-100 Hz
Stroke of piston 50 m"m
מוצעות מכונות לבדיקת התעייפות חומרים בתהליך מתיחה/לחיצה, פיתול וכפיפה, למגוון יישומים בתחומי הרפואה, מתכת, פלסטיקה...., בתדירויות גבוהות, 60-300 הרץ, בעומסים 20-500 KN.
This machine is light, compact and simple design used to test the fatigue strength of materials and
draw S-N diagram, used for research institutes, laboratories, material manufacturers and various industries
Table model, no need of foundation
This is a rotating beam type machine in which load is applied in reversed bending fashion
The standard 8 mm dia specimen is held in special holders at its ends and loaded such that it experiences a uniform bending moment
The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of th specimen is produced during each revolution
The bending moment is applied with a lever system and can be easily changed by moving a weight over the lever
Total number of revolutions at which the specimen fails are recorded by a Digital counter
An interlocking system puts off the motor at specimenl failure
Machine meets requirements of IS 5075-1969
.bmp?id=3378503)
